Operating Instructions - Jaken Medical...

Setting up the Unit to Send and Receive
2. If you are connecting to another electrocardiograph, connect the
Eclipse Direct Connect Cable #007796 to the connectors labeled
ÒIOIOÓ on the back panel of each Eclipse.
NOTE:
Follow steps 3 through 8 on both Eclipse units.
on/stby
3. Press the On/Standby key to power up to the PREVIEW screen.
- M
S
4. Press the ÒMÓ key to go to the MAIN MENU.
5. Select SYSTEM SETUP by pressing the ÒSÓ key. The SYSTEM
SETUP menu will appear (see Figure 4-1 on pg. 4-1).
6. Press the Down Arrow key to highlight the Connection Þeld
and select DIRECT.
7. Press the Left Arrow key to return to the MAIN MENU.
D
8. Press the ÒDÓ key to go to the DIRECTORY menu.
Using a Remote Connection
on/stby
- M
S
CONNECTING TO PYRAMIS
To send records to PYRAMIS, or to receive requisitions and records from
PYRAMIS, the Eclipse 850 or the Eclipse Plus must be equipped with either an
internal or external modem connected to a phone line.
1. Press the On/Standby key to power up to the PREVIEW screen.
2. Press the ÒMÓ key to go to the MAIN MENU.
3. Select SYSTEM SETUP by pressing the ÒSÓ key. The SYSTEM
SETUP menu will appear (see Figure 4-1 on pg. 4-1).
4. Press the Down Arrow key to highlight the Connection Þeld
and select MODEM.
5. Verify that the Phone # and Description Þelds are correctly
Þlled in.
6. Press the Left Arrow key to return to the MAIN MENU.
D
7. Press the ÒDÓ key to go to the DIRECTORY menu.
CONNECTING TO ANOTHER ECLIPSE
NOTE: This requires two Eclipse units with either an internal
or external modem connected to a phone line.
Eclipse Operating Instructions 8-3