Operating Instructions - Jaken Medical...

Chapter
8 Sending and Receiving Records
NOTE: Sending and receiving functions are available on
Eclipse units equipped with SCP-ECG capability. You may use
a remote connection with either an internal or an external
modem or a direct connection with another Eclipse or a
compatible ECG management system.
Eclipse 850 and Plus units with communication capabilities can receive
requisitions, as well as transmit ECGs to and receive ECGs from other Eclipse
electrocardiographs or the PYRAMIS ECG management system.
How record status affects the sending operations
NOTE:
pg. 7-2.
For the list of status codes, see ÒRecord StatusÓ on
Record status affects whether records can be sent from the Eclipse. The
following rules apply:
l
Records with status Dm can not be sent.
l Records with status Rv can not be sent.
In general, the following records will automatically be sent when BATCH
SEND ECGS is selected in the DIRECTORY menu: records with the status
ECG; records with the status ECG and Pr; records with the status RtE; and
records with the status RtE and Pr. The following rules also apply:
l
l
Records with status St or Rq will not be sent when BATCH SEND
ECGS is selected in the DIRECTORY menu. These records may be
sent individually from the Single ECG Functions list.
Records with status, No, will not be sent when BATCH SEND
ECGS is selected in the DIRECTORY menu. These records may be
sent individually from the Single ECG Functions list.
Changing Record Status
Patient records can be marked so that they are automatically sent when
BATCH SEND ECGS is selected in the DIRECTORY menu. Similarly, patient
record status can be changed to ensure that a record is not sent.
Mark Record as “SEND”
To ensure that a record is sent the next time BATCH SEND ECGS is selected,
select the MARK RECORD AS ÒSENDÓ from the Single ECG Functions list.
1. Follow the instructions for accessing the list of patient Þles (see
ÒUsing the DIRECTORY MenuÓ on pg. 7-1).
Eclipse Operating Instructions 8-1