Operating Instructions - Jaken Medical...

Chapter 7
Managing Patient Records
Additional Functions
Add New Patient
If you wish to create one or more patient Þles prior to recording any ECGs, use
the ADD NEW PATIENT selection in the DIRECTORY. This feature allows you
to input demographics into the Directory in advance of taking an ECG, which
later reduces the time required to acquire the report.
1. In the DIRECTORY menu, select the ADD NEW PATIENT Þeld
by pressing the ÒAÓ key.
2. The EDIT ID menu is displayed. Enter the patientÕs ID number,
last name, Þrst name, date of birth, sex, and as many other Þelds
as required or as time will allow (for more information, see
ÒPatient Demographic FieldsÓ on pg. 6-10).
3. A Þle is automatically created for the patient. Patient
information is saved when you press the Left Arrow key to exit
the EDIT ID menu.
Print All New ECGs
If you wish to print all ECGs in the directory which have not been printed
previously (i.e., Record Status is not PR), select the PRINT ALL NEW ECGS
item in the DIRECTORY.
1. In the DIRECTORY menu, select the PRINT ALL NEW ECGS
Þeld by pressing the ÒEÓ key.
2. All ECGs which have not been printed previously will print out
on the electrocardiograph.
Use the Left Arrow key to exit.
Print median complex
If you wish to review the averaged beats for a record, select the PRINT
MEDIAN COMPLEX item in the DIRECTORY. On interpretive units, the
median complex is used as the basis for all computerized analyses.
1. In the DIRECTORY menu, select the VIEW BY NAME or VIEW
BY ID Þeld by pressing either the ÒNÓ key or the ÒIÓ key (on the
Eclipse Plus, select VIEW DIRECTORY).
2. Locate the desired patient Þle, highlight it and press the Enter
key. The Single ECG Functions list is displayed.
3. Press the ÒRÓ key to print the median complex for the selected
record.
7-6 Eclipse Operating Instructions
NOTE:
Chart speed is Þxed at 50 mm/s.