Operating Instructions - Jaken Medical...

Chapter 7
Managing Patient Records
Printing ECG Reports
1. In the DIRECTORY menu, scroll to and select the VIEW BY
NAME or VIEW BY ID Þeld by pressing either the ÒNÓ key or
the ÒIÓ key (on the Eclipse Plus, select VIEW DIRECTORY).
2. Locate the desired patient Þle, highlight it, and press the Enter
key. The Single ECG Functions list is displayed.
3. If you wish to edit patient information, press the ÒEÓ key to
access the EDIT ID menu. Make changes as desired. Press the
left arrow to return to the Single ECG Functions list.
4. If you wish to modify the settings for Recorder Speed, Gain or
Frequency Response, press the ÒCÓ key to access the CHANGE
SPEED, GAIN, FILTER menu. Use the arrows to make different
selections. Press the left arrow to return to the Single ECG
Functions list.
5. Press the ÒPÓ key to print a copy of the report.
NOTE: Depending upon system settings, the ECG report will
include a rhythm report and a median complex report. Analysis
information may also be included on the printout for
interpretive units only, unless this feature has been disabled. To
verify or change the print settings, see ÒRhythm PageÓ,
ÒMedian Complex PageÓ, and ÒAnalysis-originalÓ on pg. 4-8.
6. Manually print a copy of the median complex report for the
record by pressing the ÒRÓ key.
NOTE:
Chart speed is Þxed at 50 mm/s.
7. Print a copy of the measurement matrix for the record by
pressing the ÒNÓ key.
Use the Left Arrow key to exit.
7-4 Eclipse Operating Instructions