Operating Instructions - Jaken Medical...

ConÞguring the USER SETUP Menus
Auto Print Received
ECGs
ON
OFF
When ON, unit automatically prints each ECG as it is received when in the RECEIVE
ECGS mode (see “Sending and Receiving records from an Eclipse” on pg. 8-6).
ENABLING PATIENT DEMOGRAPHIC FIELDS
NOTE: This menu will not be available if the Eclipse is
conÞgured to use Custom Header in conjunction with an ECG
Management System, such as the PYRAMIS System or the FAA
System.
This Þnal USER SETUP menu determines which patient demographic Þelds
appear in the EDIT ID menu. An asterisk ( * ) indicates that information in these
Þelds directly affects ECG waveform analysis.
To ensure that a Þeld does NOT appear in the EDIT ID menu, the Þeld setting
should be ÒOFFÓ. Otherwise, select ÒON,Ó ÒON, CLEARÓ or ÒON, HOLDÓ to
make each demographic Þeld appear in the EDIT ID menu; these Þelds also
appear on printouts.
l
l
Select ÒON, HOLDÓ if you want every patient Þle to have the same
information in this Þeld. Until the information is typed over, the
EDIT ID menu will keep the information in these Þelds even if the
Eclipse is turned off. For example, you may want every patient
record to be labeled with the same Department name.
ÒONÓ and ÒON, CLEARÓ act the same. Fields with this setting are
cleared for every new patient or when the unit returns to Standby
mode.
*V3 Placement ON, CLEAR
ON, HOLD
OFF
Used for pediatric recording of V4R only.
Last Name
First Name
*D.O.B.
*Age
*Age Format
*Sex
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Eclipse Operating Instructions 4-13