Operating Instructions - Jaken Medical...
Operating Instructions - Jaken Medical...
Operating Instructions - Jaken Medical...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 4<br />
System Setup and User Setup<br />
6. Use the keyboard to enter information into Þelds with a<br />
blinking cursor, such as Inst. Name.<br />
Use the Left Arrow key to exit the menu.<br />
SYSTEM SETUP Fields<br />
Following is a description of the SYSTEM SETUP Þelds and options. Available<br />
choices are listed to the right of the Þeld name.<br />
NOTE: When applicable, the type of information and the<br />
number of characters allowed are listed in brackets to the right<br />
of the Þeld name.<br />
Eclipse electrocardiographs equipped with SCP-ECG capability can send and<br />
receive ECG records. The items under MANAGEMENT SYSTEM refer<br />
primarily to the use of an ECG Management System, such as the PYRAMIS<br />
System or the FAA System. The Phone #, Description, Connection and Baud<br />
Rate Þelds are also used when sending records between two Eclipse units. If<br />
you are using a management system, be sure to consult your System<br />
Administrator so that you can setup your Eclipse to be compatible with the<br />
management system. For more information on sending and receiving records,<br />
see ÒSending and Receiving RecordsÓ on pg. 8-1.<br />
Field Name<br />
User 1-2<br />
Select<br />
Line Filter<br />
Date Format<br />
1<br />
2<br />
Options, Limitations And Description<br />
For each “User,” there is a customized group of formats. For more<br />
information on User 1 and User 2, see “Configuring the USER<br />
SETUP Menus” on pg. 4-5.<br />
NOTE: The unit automatically turns off and on again whenever you<br />
change the User selection. This ensures that all changes take effect.<br />
50 Hz<br />
60 Hz<br />
OFF<br />
Filters electrical interference from AC line voltage.<br />
MM/DD/YY<br />
DD.MM.YY<br />
YY.MM.DD<br />
4-2 Eclipse <strong>Operating</strong> <strong>Instructions</strong>