Operating Instructions - Jaken Medical...

Chapter 3
Keyboard and Displays
ECG
RHYT
MAN
STOP
1 2
RLF
3
V123
5
1
4
V456
6
2
(A) FUNCTION KEYS
Use the ÒECGÓ key to acquire and print a 12-lead Auto ECG (a series of reports
using pre-programmed lead sequences and settings.)
Use the ÒRHYTÓ key to acquire an Auto Rhythm report (a rhythm strip with a
pre-selected number of pages; uses the leads currently selected in the
PREVIEW screen).
Use the ÒMANÓ key to acquire a Manual Rhythm report (a continuous rhythm
strip of the leads currently selected in the PREVIEW screen). This report will
run until the ÒSTOPÓ key is pressed.
Use the ÒSTOPÓ key to terminate any of the above functions and/or return the
display to the PREVIEW screen.
(B) NUMERIC/ MACHINE CONTROL
Use the numeric keys to enter numeric data, when required. These keys may
also be used as hot keys for speciÞc operations (see ÒHot KeysÓ on pg. 3-9).
Use the Ò1Ó and Ò2Ó keys to select pre-programmed lead triplets for the display;
the displayed leads will also be printed on Manual Rhythm and Auto Rhythm
reports.
In the PREVIEW screen, use the Ò1Ó and Ò2Ó keys with the Shift key to select
either User 1 or User 2. See Chapter 4 for user setup information.
Use the Ò3Ó and Ò4Ó keys to select pre-programmed lead triplets for the display;
the displayed leads will also be printed on Manual Rhythm and Auto Rhythm
reports.
Use the Ò5Ó and Ò6Ó keys to select user-deÞned leads (Custom Lead 1 and
Custom Lead 2) for the display; the displayed leads will also be printed on
Manual Rhythm and Auto Rhythm reports. See ÒCUSTOM LEAD 1 &
CUSTOM LEAD 2Ó on pg. 4-9 for setup information.
7
mm/S
Use the Ò7Ó key to toggle the Paper Speed between 10, 25 and 50 mm/sec.
8
mm/mV
Use the Ò8Ó key to toggle the ECG Gain between 5 mm/mV, 10 mm/mV,
20 mm/mV, L10,C5 mm/mV and L20, C10 mm/mV.
9
Hz
Use the Ò9Ó key to toggle the ECG Filter Frequency between 40 and 150 Hz.
0
1mV
Use the Ò0Ó key to produce a 1 mV Calibration Pulse on the display and
printouts.
NOTE: When numeric keys are used to change settings, the
settings are in effect for the current ECG only. To change settings
for all future ECGs, modify the settings in the USER SETUP
menus or the SYSTEM SETUP menu.
3-2 Eclipse Operating Instructions