MAC ® 1200 Operations Manual - Jaken Medical...

Recording in 12 Lead Mode
• When you have selected all ECGs, press the
key to return to the function keys.
• Using the cursor, select the “Send” command and
initiate the function with .
The transmission is first initialized (Figure 5-12),
then it starts (Figure 5-13).
Figure 5-12. Initializing the transmission
Figure 5-13. Display during ECG transfer
After the transmission, a message on the display
indicates the number of successfully transmitted
ECGs. As soon as you acknowledge the message
with , the 12 Lead Mode acquisition screen
appears.
If it is not possible to transmit the ECG (wrong
modem setup, modem off), the unit will display an
error message, such as "ECG Transmission Error!
(CSI)" (Figure 5-14).
In this situation you have the following choices:
− you can repeat the transmission with
− you can change the settings with setup
− you can stop the transmission with .
Figure 5-14. Error message
5.5.4 Direct Transmission of Data to a
MUSE CV Information System
Before sending data to the MUSE CV Information
System, the MAC 1200 automatically logs on to the
MUSE CV Information System. Then the data will
be transmitted. If the transmission is stopped, the
MAC 1200 may take a few seconds before canceling
the connection because it has to log off the MUSE
CV Information System first. Then the standard
display reappears.
36 MAC® 1200 227 492 04-F