MAC ® 1200 Operations Manual - Jaken Medical...
MAC ® 1200 Operations Manual - Jaken Medical...
MAC ® 1200 Operations Manual - Jaken Medical...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Recording in 12 Lead Mode<br />
Storage program<br />
[Print] Send Delete Change<br />
Delete transmitted ECGs<br />
Print directory<br />
ECG taken S Pati<br />
18.12.2000 09:56:35 (S)<br />
18.12.2000 10:21:22 (S)<br />
18.12.2000 11:22:56 (S) 1<br />
18.12.2000 11:54:22 (S)<br />
19.12.2000 08:22:56<br />
19:12:2000 10:23:55<br />
19.12.2000 11:01:25<br />
19.12.2000 12:12:44<br />
19.12.2000 15:55:12<br />
19.12.2000 16:15:11<br />
19.12.2000 17:33:18<br />
Figure 5-3. Memory table of contents shifted to the left<br />
1 (S) indicating ECGs transmitted to a host system<br />
Storage program<br />
Memory is full<br />
[Print] Send Delete Change<br />
Delete transmitted ECGs<br />
Print directory<br />
ECG taken S Pati<br />
18.12.2000 09:56:35<br />
18.12.2000 10:21:22<br />
18.12.2000 11:22:56<br />
18.12.2000 11:54:22<br />
19.12.2000 08:22:56<br />
19:12:2000 10:23:55<br />
19.12.2000 11:01:25<br />
19.12.2000 12:12:44<br />
19.12.2000 15:55:12<br />
19.12.2000 16:15:11<br />
19.12.2000 17:33:18<br />
Figure 5-4. "Memory full" message<br />
Note<br />
– When printing a large number of stored ECGs,<br />
we recommend to connect the unit to the power<br />
line or to check that the battery is fully charged.<br />
Due to the limited size of the display, it is not possible<br />
to view the entire list at a time. These are the<br />
columns that follow to the right of the patient name:<br />
- date and time of the ECG recording<br />
- S (indicates that the ECG has been sent to another<br />
system, 1, Figure 5-3)<br />
- patient ID<br />
- comments<br />
To display the remaining columns, you can continuously<br />
scroll the display with or you can shift the<br />
alt<br />
list by the display's width with and (Figure<br />
5-3).<br />
• When you have selected all ECGs, press the<br />
key to return to the function keys.<br />
• Using the cursor, select the function you need<br />
and initiate it with .<br />
With the "Print directory" command, you print a list<br />
of all stored ECGs. The printout includes all columns,<br />
except the "Comments" column.<br />
If you try to save an ECG when the memory is full, a<br />
message informs you of the memory status (Figure<br />
5-4). When you delete an ECG from memory, the<br />
new ECG will automatically be saved.<br />
The unit may be set up to automatically save ECGs<br />
retrieve<br />
(without pressing store/<br />
) and automatically remove<br />
ECGs from memory that were successfully transmitted<br />
to CardioSys, CardioSoft or to the MUSE CV<br />
Information System.<br />
The storage program can be terminated at any time<br />
with .<br />
– When you terminate the storage program with<br />
ECG again.<br />
, it is not possible to save the current<br />
30 <strong>MAC</strong>® <strong>1200</strong> 227 492 04-F