CardioSoft - Jaken Medical...

Resting ECG: Entering Test Information
Entering Test Information
Overview
Depending on your system configuration, the Test Information window
will open automatically or you can display it with the Test Information
button.
These are the tabs of the menu
Patient Information
Test / Personnel
Medications
Closing a tab with Cancel or OK will bring up the acquisition screen.
Patient Information Tab
1 2
051A-R
3
4
The Patient Information tab is open.
1. Verify the patient's name and ID. If the data is incorrect, click
Modify to change.
2. Enter the blood pressure readings or initiate a blood pressure
measurement with Start BP....
3. Enter a designation for the Room (5 characters max.).
4. Select a Location Number (necessary only when you work with the
MUSE CV database system).
Note
You can assign a name to the location number (see section “MUSE
Tab” on page 11-55) which would appear instead of the number (e.g.
on the Test Summary).
Note
The Patient Information can be assigned to the patient file or only to
the pending test.
Revision A CardioSoft 5-3
2023324-053