CardioSoft - Jaken Medical...

Product Overview: PC Setup
Connecting Further Accessories
The illustration shows further accessories and the interfaces where they
are connected.
If your PC has more than two serial interfaces, please bear in mind that
devices connected to COM1 and COM3 cannot be operated
simultaneously, unless an interface board with separate interrupts (IRQ)
has been installed (setup via Windows -> Control Panel). The same is true
for COM2 and COM4. When your mouse is connected to COM1, for
instance, you cannot connect another device to COM3. Connecting the
ergometer to COM2 and the respiration flow sensor to COM4 is possible,
however.
Caution
Radio Interference — In residential areas, devices and
installations with radio-interference protection according
to EN 55011, class A, may be disturbed by radiation
emitted by the PC system. In this case, the user is
required to take appropriate measures.
01A
MAC 1200, MAC 500
Via the serial interface, the ECG systems can be connected to a PC
meeting the minimum GE Medical Systems Information Technologies
requirements. Please contact the GE Medical Systems Information
Technologies Customer Service for advice. This combination of devices
allows you to transfer resting ECGs acquired in the automatic mode to
the PC, including the pertinent data.
2-8 CardioSoft Revision A
2023324-053