CardioSoft - Jaken Medical...

Product Overview: PC Setup
Connecting the Acquisition Module
The acquisition module that connects to your computer is the interface
between the patient and the computer. Two different acquisition modules
are available for use with the system: CAM 14 and CORINA.
CAM 14
Always connect the CAM-14 acquisition module to the CAM-USB or to
the CAM-USB A/T interface box, never directly to the PC.
1. Attach the lead label stickers to the acquisition module.
There is one set of lead label stickers with AHA labeling and one
set with IEC labeling.
2. Connect the acquisition module to the CAM-USB or CAM-USB A/T
interface box.
To remove the cable from the acquisition module, press in the
spring lock located on the side of the cable.
3. Plug the individual lead wires into the acquisition module and
connect the electrode clips to the BNC sockets of the lead wires.
Observe the lead labels: the labels on the cable must match those
on the acquisition module.
Having connected the electrode clips to the BNC sockets, turn
them 45° clockwise so that they lock into place.
Revision A CardioSoft 2-5
2023324-053