CardioSoft - Jaken Medical...

Spirometry Test: Conducting Spirometry Tests
Note
For flow-volume measurements, the patient's cooperation is
essential.
The ambient conditions should be checked every day before
performing spirometry tests; the room temperature is the factor
with the most impact on the test results (see section “Acquisition
Tab” on page 11-36).
Refer to section “Acquisition Tab” on page 11-36 for information
on selecting the Measurement Mode, the Interpretation Mode, or
the Equation for Reference Value Calculation or on entering the
PT Code.
A B C D
E
F
G
H
I
J
K
L
M
N
O
P
Q
201A-SP
S
R
A
Click buttons to change the waveform scale.
B
Click option button to display the flow-volume loop.
C
Click option button to display the volume-time curve.
D
Reference curve.
E
Table with actual and reference values.
F
Patient data.
G System evaluation area (MILLER square only with LF 501).
H
Click to enter test information.
8-8 CardioSoft Revision A
2023324-053