12.03.2014 Views

CardioSoft - Jaken Medical...

CardioSoft - Jaken Medical...

CardioSoft - Jaken Medical...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Ambulatory Blood Pressure Measurement: Ambulatory Blood Pressure Monitors<br />

Ambulatory Blood Pressure Monitors<br />

The following ambulatory blood pressure monitors can be connected to<br />

the system:<br />

TONOPORT V: blood pressure only, oscillometric method<br />

TONOPORT IVa: blood pressure, oscillometric and auscultatory<br />

method, as well as ECG<br />

For information on setup and operation of the ambulatory blood pressure<br />

monitor, please refer to the TONOPORT Operator's Manual.<br />

Caution<br />

Patient Hazard — Disconnect TONOPORT from the<br />

patient when it is connected to the PC.<br />

Note<br />

Check that the correct port for the ambulatory blood pressure<br />

monitor is configured (see section “Devices Tab” on page 11-<br />

53).<br />

Connecting the Ambulatory BP Monitor<br />

180A-BP<br />

1. Turn the monitor off and on again.<br />

2. Wait for the time to be displayed, then connect the monitor to the PC.<br />

Revision A <strong>CardioSoft</strong> 7-3<br />

2023324-053

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!