CardioSoft - Jaken Medical...

Exercise Test: Before the Test
Note
Cubic Spline and FRF are algorithms that significantly reduce
artifact and baseline fluctuations without adversely affecting the
ECG signal as conventional filters do. Therefore, the system allows
you to enable and disable the algorithms during the test, as needed.
Note
During the exercise test, a new protocol selection with Select Protocol
will become effective in the next phase.
Note
Pacemaker Patients - It is very important that you indicate on the
first database screen, pictured below, whether your patient has a
PACEMAKER implanted. A check indicates that the patient DOES
have a pacemaker.
We recommend the following filter settings for exercise tests:
FRF ON
40 Hz
6-10 CardioSoft Revision A
2023324-053