CardioSoft - Jaken Medical...

Exercise Test: Entering Test Information
Entering Test Information
Overview
Patient Information Tab
Depending on your system configuration, the Test Information window
will open automatically or you can display it with the Test Information
button.
These are the tabs of the menu
Patient Information
Test / Personnel
Medications
Closing a tab with Cancel or OK will bring up the acquisition screen.
1 2 3 4 5 6 7
051A-S
The Patient Information tab is open.
1. Verify the patient's name and ID. If the data is incorrect, click
Modify to change.
2. Select the protocol for the next test (refer to section “Protocol Editor
Tab” on page 11-19 for information on changing the default protocol).
3. Confirm or change the Max. predicted HR for the exercise test (refer
to section “Miscellaneous 1 Tab” on page 11-24 for information on
changing the calculation method).
4. Enter the Target HR (%) of the Max. predicted HR (refer to section
“Miscellaneous 1 Tab” on page 11-24 for information on changing the
percentage permanently).
5. Enter a designation for the Room (5 characters max.).
6. Select a Location Number (necessary only when you work with the
MUSE CV database system).
Note
You can assign a name to the location number (see section “MUSE
Tab” on page 11-55) which would appear instead of the number (e.g.
on the Test Summary).
7. Enable or disable TWA analysis.
6-4 CardioSoft Revision A
2023324-053