Introduction.

Workshop PG5
FUPLA programming
4.6 BUILD and debug your program
BUILD:
Once you have finished the drawing, you can compile the entire program by clicking
on the BUILD button.
You can use the build button from the
program editor or from the
Project Manager. It is on both tool
bars.
Message Window:
The message window will show you all the information you'll need:
If you have entered the
program correctly then the
message window should
now tell you:
Build successful. Total
errors: 0 Total warnings: 0
If there are any errors in the drawing, then it will be displayed in red letters. Click
on the red letters, and it will take you to the error in your program.
© Saia-Burgess Controls Ltd. Page 4-14