Introduction.

Workshop PG5
FUPLA programming
Invert binary signals:
In the event of an emergency stop, the motor must not run. To achieve this,
we have to invert the emergency stop signal.
Activate the “Invert” tool and click on the line pin of the AND FBox:
Calling the help on
FBoxes:
The only thing missing, is the blinking lamp.
Add a blinker from the “Blinker” family (For more information on the different blinkers,
right click on the FBox Name in the FBox Selection Window or place the
FBox on the drawing board and double click on the FBox:
Take the FBox “Blink dely T” and add it to the drawing.
The "Time Value" is always given in 100
ms.
Example: If you enter a 10 in the column
“Address/Value", of your symbol list that
means that the Blinker will blink in 1.0 second
intervals. Add this to your symbol
editor list.
An “En” input on a FBox
always stands for Enable.
Example:
The output Q will only blink
if the signal connected to En,
stays high.
© Saia-Burgess Controls Ltd. Page 4-13