Introduction.

Workshop PG5
FUPLA programming
Edit a FUPLA
function:
1. Start the Fbox mode by clicking on the "FBox" icon.
2. Choose a family and then a function within
the family.
3. Place the Fbox on the drawing area by
clicking the left mouse button.
2. Family
1.
4. For further information right-click the Fbox
or the FBox Name on the selection window
Function
4.
Connect the
functions
(first solution)
Connect the
functions
(second solution)
Erase a line or
a function.
1. Click on the “Select” icon.
2. Move your pointer on the Fbox and push the left
mouse button. ( keep the button pressed )
3. Now you may move the Fbox to the desired location.
4. Once two connection points touch each other they
are connected.
1. Click on the “Lines” icon.
2. Place the pointer on the departure point of your
connection and click the left mouse button.
3. Click the left mouse button each time you want to
change direction.
4. Once you arrive to the other connection point just
press the left mouse button a last time and the two
points are connected.
5. If you want to stop editing the line then just press the right
mouse button.
Click on the "Eraser" icon, and click on the part you
would like to delete.
3.
2. 3.
1.
2.
4.
1.
4.
© Saia-Burgess Controls Ltd. Page 4-4