Introduction.

Workshop PG5
Resources
Add several symbols
to the Symbol
editor:
You can add a range of symbols to your list if you want. Just enter the symbol
name with the first and the last element number as shown, (Drainpumps1..8 O
32 ;Pumps in building F). 8 is the number of symbols, O is for output, and 32
is the starting address of the range you are entering. Press the “Enter” button,
and the symbol editor will complete the list.
Another option is to enter a symbol
and address in the symbol editor,
open the options window, (click on
Symbols, then Options) enter the
symbol and select “ Create reference
for symbol”.
Click OK, and then highlight the
symbol in the editor. Press the
Insert button, the symbol is entered
but incremented by one. This can be
helpful if you have a string of inputs
or outputs and you want or need to
change the physical address location,
in the software, you would just
change the first one, and all the
others would follow.
© Saia-Burgess Controls Ltd. Page 3-18