Introduction.

Workshop PG5
Resources
3.4 Working with symbols:
Writing a Symbol
list:
Open the file you are going to work with. This will also open the Symbol
Editor. Click on Group/Symbol, and then press the “INSERT” button. A new
symbol field is added to the list instantly. Enter the symbol name, type,
address/value, and a comment. Press Enter to confirm your entry, and then for
the next symbol, simply press the insert button. Note: The editor automatically
enters the previous symbol name and address but increments them by 1.
(See the picture below). You can change the comment and accept the name,
type, and address/value, or you can overwrite the entry with a new name,
type, address/value, and comment.
If you already have a list started, and would simply like to add a symbol, just
click on the last symbol, press the “INSERT” button and this will open another
symbol field.
© Saia-Burgess Controls Ltd. Page 3-17