Introduction.

Workshop PG5
Write your first program
2.5 Test your program
1. Go online. click on the icon and the start and stop icons will illuminate.
2. Click on the start icon and the PCD is now in the run mode. Confirm
that the run led is on. (The led is located on the front of the PCD).
3. Click on the stop icon and the PCD is now in the stop mode. Confirm
that the run led is off.
4. Click on the start icon to go back into the run mode.
5. Double click on the Input output combination file.
View your program
online:
6. Click on the Asynchronous Data Mode icon. Your program is now
displayed.
7. Activate input 1 and confirm it’s state changes to a high, along with the
state of Output 32. Deactivate Input 1 and activate Input 2. Output 32
should go high again.
8. You have completed your first program!!!
Click on the “Asynchronous
Data Mode” icon.
If you turn on and
off you input 1, the
state will change
on the screen
© Saia-Burgess Controls Ltd. Page 2-8