Introduction.

Workshop PG5 Exercise Chapter 7
Solutions 1 to 7:
Solution:
1:
SET RES COM INC
How can you know?
• Look up the instruction in the Instruction-List booklet. The instructions
marked with a D, are only executed if the ACCU is high.
• Enter the instruction in the S-Edit, place the cursor on the instruction
and press “F1”=> A online help will tell you everything about
the instruction.
2:
ACC H
ACC L
ACC C
Sets the ACCU to high
Set the ACCU to low
Complements the ACCU state high
becomes low, low becomes high
3:
ACC E
4:
4.1
STH I 1 ; Copy the state of I 1 into the ACCU
ANH I 2 ; AND link the ACCU with the state of
;I 2 & then set the ACCU according to
;the result.
ORH I 3 ; Set the ACCU if I 3 is high.
; (Or function)
OUT O 32 ; Set output 32 to the ACCU state.
© Saia-Burgess Controls Ltd. Page 7E-3