Introduction.

Workshop PG5 Exercise Chapter 4
Double-clcking on a FBox with triangle on the lower left side always opens a parameter
window.
Inside this parameter window you can set the behaviour of the FBox (Example: PID
regulator or Communication ) . In the case of the "Dynamize" FBox we can choose
how exactly we want the FBox to behave. Set the option "Accept power up edge "
to "Always"
6. Read the counter value and compare it with 8.
7. If the counter value is higher then 8, then make the output 17 blink.
FBox: integer :Is greater than
Blinker:Blink delay T
8. Add a long comment to the Fupla page, explaining what your program does.
9. Print your file
© Saia-Burgess Controls Ltd. Page 4E-20