Introduction.

Workshop PG5 Exercise Chapter 4
Timers and Compare functions
Working with registers, constants, timers and flags
This time the types are not limited to binary values and you can use all the resources
we saw like Registers, flags and so on.
Open a new FUPLA file in the Project Manager and call it TIMER.
This is what we are going to do:
Example:
Daily-Timer
Create a small program where you can turn on and off a machine every day at the
same time.
Use the following symbols:
HMS = hours, minutes and seconds (current time)
ONTime =Time where you want to turn the machine on
OFFTime=Time where you want to turn the machine off
© Saia-Burgess Controls Ltd. Page 4E-13