Direct Torque Control with Space Vector Modulation (DTC-SVM) of ...

References
Books and PhD-Thesis
1. I. Boldea, S.A. Nasar, “Electrical drives”, CRC Press, 1999.
2. G. F. Franklin, J. D. Powell, “Feedback Control of Dynamic Systems”, Addison-
Wesley Publishing Company, 1994.
3. M. P. Kaźmierkowski, H. Tunia, “Automatic Control of Converter-Fed drives”,
Elsevier, 1994.
4. M. P. Kaźmierkowski, R. Krishnan, F. Blaabjerg, “Control in Power Electronics”,
Academic Press, 2002.
5. P.C. Krause, O. Wasynczuk, S.D. Sudhoff, “Analysis of Electric Machinery”, IEEE
Press, 1995.
6. R. Krishnan, “Electric Motor Drives – Modeling, Analysis, and Control”, Prentice Hall,
2001.
7. T. Kaczmarek, K. Zawirski, “Układy napędowe z silnikiem synchronicznym”,
Politechnika Poznańska, 2000.
8. M. Malinowski, "Sensorless Control Strategies for Three-Phase PWM Rectifiers", PhD
Thesis, Warsaw University of Technology, 2001.
9. Ch. Perera, “Sensorless Control of Permanent Magnet Synchronous Motor Drives”,
PhD thesis, Institute of Energy Technology, 2002.
10. K. Rajashekara, A. Kawamura, K. Matsuse, “Sensorless Control of AC Motor Drives”,
IEEE Press,1996, USA.
11. M. Zelechowski, “Space Vector Modulated – Direct Torque Controlled (DTC-SVM)
Inverter-Fed Induction Motor Drive”, Phd Thesis , Warsaw University of Technology,
2005.
12. P. Vas, “Sensorless Vector and Direct Torque Control”, Oxford University Press, 1998.
Model of PMSM
13. C. Bowen; Z. Jihua; R. Zhang; “Modeling and simulation of permanent magnet
synchronous motor drives”, Electrical Machines and Systems, ICEMS 2001, Vol. 2, 18-
20 Aug. 2001, pp. 905 – 908.
14. P. Pillay, R. Krishnan, “Modeling of permanent magnet motor drives”, Transactions on
Industrial Electronics, Vol. 35, Nov. 1988, pp. 537 – 541.
15. N. Urasaki; T. Senjyu; K Uezato, “An Accurate Modeling for Permanent Magnet
Synchronous Motor Drives”, Applied Power Electronics Conference and Exposition,
APEC 2000, Vol. 1, 6-10 Feb. 2000, pp:387 – 392.
16. A.H. Wijenayake, P.B. Schmidt, “Modeling and analysis of permanent magnet
synchronous motor by taking saturation and core loss into account”, International
Conference on Power Electronics and Drive Systems, Vol. 2, 26-29 May 1997, pp. 530
– 534.
Inverter and PWM Modulation
17. L. Ben-Brahim, "The analysis and compensation of dead-time effects in three phase
PWM inverters", Industrial Electronics Society, 1998. IECON '98. Proceedings of the
24th Annual Conference of the IEEE, Vol. 2d, 31 Aug.-4 Sept. 1998, pp.792-797.
18. V. Blasko, "Analysis of a hybrid PWM based on modified space-vector and trianglecomparison
methods", IEEE Transactions on Industry Applications, Vol. 33, Issue: 3,
May-June 1997, pp.756-764.
19. F.Blaabjerg, J.K. Pedersen, P. Thoegersen, “Improved modulation techniques for
PWM-VSI drives”, IEEE Transactions on Industrial Electronics, Feb. 1997, Vol. 44, pp.
87 – 95.
20. J.W. Choi; S.K. Sul, "Inverter output voltage synthesis using novel dead time
compensation", IEEE Transactions on Power Electronics, Vol. 11, Issue: 2, March
1996, pp.221-227.
173