iMC-M_iMC-MP_Operating Instruction - Bedienungsanleitungen ...

More documents

Recommendations

Info

iMC-P – Operating Instruction electrical data: power supply voltage: wide range input 110 - 230VAC 50/60 Hz peak current per amplifier: 4,2 A rated current per amplifier: 3,5 A power supply voltage of the amplifiers: 48 VDC automatic current reduction: to 60% digital inputs: 8 x inputs digital outputs: 8 x transistor outputs 24VDC/300 mA 1 x relay output 230V/6A analog outputs: 1 x analog output 0…10V for speed control setting to a frequency inverter cover/door control: yes motor brake on Z-axis: yes safety data: EN ISO 13849-1:2006 category 2, PL c fuse: 2 x 6,3A/250V time lag software for use with core-module: CNC mode: PALPC 2.1, @-format DNC mode: Remote (optional: ProNC) page - 8
iMC-P – Operating Instruction 4 Hardware description 4.1 Front side iMC-P 5 - operation mode switch (key switch) Use this switch to choose between automatic- and setup-mode. In automatic-mode (AUTO) you can only open the cover or safety door of the machine if no axis is in motion and the mounted working spindle is switched off (means that spindle does not turn). In the setup-mode (TEST) you can only open the cover or safety door of the machine if the mounted working spindle is switched off (means that spindle does not turn). You can just move the axes at opened cover or safety door if you press the ACK button. Ensure that in setup-mode (key switch on TEST) only authorized personal operates on the machine. 6 - cover-button Use this button to open the machines cover or safety door. This is possible only if the conditions from point “4 – operation mode switch“ are complied. An enable for opening of the cover or safety door is signalized by a white lighted cover button. page - 9
Page 1 and 2: 4-Axis-Stepper-Motor-Controller iMC
Page 3 and 4: Table of contents 1 Introduction ..
Page 5 and 6: iMC-P - Operating Instruction 1.3 I
Page 7: iMC-P - Operating Instruction 3 Tec
Page 11 and 12: iMC-P - Operating Instruction 4.2 B
Page 13 and 14: iMC-P - Operating Instruction Use e
Page 15 and 16: iMC-P - Operating Instruction Analo
Page 17 and 18: iMC-P - Operating Instruction 4.3 A
Page 19 and 20: iMC-P - Operating Instruction Curre
Page 21 and 22: iMC-P - Operating Instruction 5.2 C
Page 23 and 24: iMC-P - Operating Instruction 3. Cl
Page 25 and 26: iMC-P - Operating Instruction 5.4 D
Page 27 and 28: iMC-P - Operating Instruction 4. Ma
Page 29 and 30: 6 EC - Declaration of Conformity De

iMC-M_iMC-MP_Operating Instruction - Bedienungsanleitungen ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?