CombiFlash Torrent® User Manual - Isco

Section 4 User Help Reference
4.2.3.9 Calibrate Touchscreen
Choose this command from the touch screen to calibrate the
interaction between touch screen display elements and stylus
location.
The calibration routine places a series of targets on the touch
screen display. Touch the exact center of each target with a
stylus. The routine will move clockwise through 20 calibration
targets, after which the module will return to the normal
display.
During calibration routine, ensure that no part of your hand or
anything other than the stylus touches the screen.
Note: If you select this command from a remote connection,
the module will start the calibration routine. Invoking this
from a remote connection may be useful if the module is
mis-calibrated to a degree that this menu command cannot be
selected from the touch screen.
4.2.4 Help
PeakTrak’s Help menu has the following options:
4.2.4.1 Help
Choose this command to view the Help documentation.
4.2.4.2 Service
Qualified service personnel use this command to access the
module’s service functions. These service functions are
password protected to restrict their use to trained personnel.
4.2.4.3 Software Update
Choose this command to open a window used to install patch
files to update your CombiFlash Torrent Module software.
4.2.4.4 Export Log Files
During operation, the module writes operating data to a log
file. Teledyne Isco service personnel can interpret this data to
optimize module performance or to troubleshoot difficulties.
Teledyne Isco recommends that you use this menu command
only when advised by a qualified service technician.
4-9