CombiFlash Torrent® User Manual - Isco

Section 4 User Help Reference
4.1.2.1 Default Methods
When PeakTrak is started, and every time you insert a
RediSep Rf column, the module loads a default method. A
default method contains Teledyne Isco’s recommended basic
and advanced settings for the use of RediSep Rf columns on
the module. There is a default method for each size and media
type of RediSep Rf column. See REDISEP RF COLUMN
SELECTION GUIDE [ON-LINE].
Default methods provide a starting point for your separation
or purification. From these initial settings, you can perform a
purification run, or you can modify the settings for your next
run. Subsequent runs will use the settings in the active
window. If you have modified the settings, you can save the
method file for future use.
If you find that the default methods are not a practical
starting point for your applications, the default methods can
be changed to meet your specific requirements. See EDITING A
DEFAULT METHOD [4.4.4].
4.1.3 Run File
When the module has finished a run, it saves the run history
in a Run file. The history includes the METHOD FILE [4.1.2]
settings, collection point information, and a chromatogram.
You can open and review the Run files stored by the module.
To open a Run file, use the FILE>OPEN [4.2.1.2] menu command.
Run files use an *.run filename extension.
4.1.4 How to get PeakTrak help
PeakTrak help can be displayed by selecting Help>Help from
PeakTrak’s menu.
If you need additional help, refer to Teledyne Isco’s CONTACT
INFORMATION [ON-LINE].
4.2 PeakTrak Menu Options
PeakTrak menus include:
•FILE [4.2.1]
•METHOD EDITOR [4.2.2]
4-3