CombiFlash Torrent® User Manual - Isco
CombiFlash Torrent® User Manual - Isco
CombiFlash Torrent® User Manual - Isco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CombiFlash</strong> Torrent® <strong>User</strong> <strong>Manual</strong><br />
CAUTION<br />
Pinch point. Your fingers or hands can be seriously<br />
injured if you place them between the moving parts of<br />
the Solid Load Cartridge Cap Mount or the Upper<br />
Column Mount. Use care when installing solid load<br />
cartridges or columns.<br />
3. Ensure the Torrent automatically loads a default method<br />
for the column. If not, use the touch screen to manually<br />
select the RediSep column media and size.<br />
4. Touch the METHOD EDITOR menu option to open the<br />
Method Editor window.<br />
5. Touch the TIME TO CV (Column Volume) button to display<br />
the run time in column volumes.<br />
6. In the Peak Collection section of the display, select the<br />
PEAKS option.<br />
7. Touch the EXIT button and select the YES option to save the<br />
changes.<br />
8. Touch the PLAY button. This opens the Run Requirements<br />
window.<br />
a. Select LIQUID for the Sample Loading Technique.<br />
b. Select the Start Rack and Start Tube number for the<br />
fraction collector. If using the Fractionation Valve, the<br />
set of containers is considered a rack. The Start Tube<br />
number identifies which of the six valve positions to<br />
start from.<br />
c. Review the Solvent Requirements and add solvent if<br />
necessary.<br />
d. Touch the OK button to begin column equilibration.<br />
9. Prepare the Test Mix B vial (60-5244-109) by completely<br />
dissolving the dry sample in 2 mL of ethyl acetate.<br />
Note<br />
The solution should be used within 24 hours or discarded.<br />
2-38