CombiFlash Torrent® User Manual - Isco
CombiFlash Torrent® User Manual - Isco
CombiFlash Torrent® User Manual - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section 2 Preparation<br />
• Ensure that no open containers or spills of organic<br />
solvent are in close proximity to the Torrent.<br />
• Ensure that the Torrent is located in a well-ventilated<br />
area.<br />
• Ensure that there is no visible solvent leakage from the<br />
Torrent.<br />
If PeakTrak continues to display the Vapor Limit alarm after<br />
you have made these checks and corrected any problems<br />
found, it is likely that organic vapors are present in the ambient<br />
environment of your laboratory. In this case, increase the<br />
setting of the Vapor Limit. Settings greater than 12 are appropriate<br />
for laboratory environments with a somewhat elevated<br />
background solvent vapor concentration, representing a safe<br />
setting, but one with a reduced margin for error.<br />
Set Default Tube Volumes – Click this button to open a<br />
window from which you can set the default volume of the<br />
collection tubes. You can increase or decrease these values to<br />
set the desired default volume collected in each container. Be<br />
sure you do not overflow the containers by exceeding their<br />
capacity.<br />
The system will automatically advance to the next tube (or<br />
container when using the Fractionation Valve) when this<br />
default volume is met in each tube. Keep in mind that<br />
advanced method settings (discussed in Section 3 and the<br />
on-line help) may override this default setting. During a run,<br />
other factors such as automatic tube advances for detected<br />
peaks will affect collected volume.<br />
2.13.2 <strong>User</strong> Preferences<br />
Use the <strong>User</strong> Preferences tab to configure system operation for<br />
each user. Select a user from the drop-down list and configure<br />
the following:<br />
Note<br />
New systems will only have one user account named “common.”<br />
Language – Select the user’s desired language from the<br />
drop-down list box.<br />
2-31