CombiFlash Torrent® User Manual - Isco

Section 5 Remote Interfaces
uses a JetDirect print queue, also ask for the port number.
When this information is known, you can proceed with
configuring system for network printing.
1. Select the Tools>Configuration menu command.
2. The Configuration window has two tabs. Select the
Network Configuration tab.
3. Follow the on-screen instructions for entering the address
and queue information.
4. Click OK to save the settings. The Torrent will send a test
page to the printer.
After successfully printing a test page, the network printer
will be available for printing using the File>Print menu
command or through the Automatically Print Report at End of
Run feature in the installation section.
5.1.3 Network File Save Configuration
By default, this option is disabled and post-run reports are
automatically saved internally on the Torrent. You can recall
any run and view it from the system as long as the .RUN file
has not been deleted. To save the post-run report for viewing
elsewhere, you can save the run history as text or PDF files as
needed. Keep this option disabled when there is no need, or
only an occasional need to save a run history file externally.
To save all run histories automatically as a text or PDF file,
configure the Network File Save option. This allows the
Torrent to access the corporate network and save the file in a
selected Network Share folder. Consult with your network
administrator to configure these settings.
Note
All server and domain names must be fully qualified. That is,
entries must include the full name (server name.domain.
domain…). Use forward slashes, not back slashes, when entering
the network share path.
5.1.4 Apple Mobile Digital Devices
You can wirelessly monitor and control a Torrent using the
PeakTrak app. The app is designed for a mobile digital device
5-3