CombiFlash Torrent® User Manual - Isco

CombiFlash Torrent® User Manual
6. Confirm that your network administrator has completed
any necessary network changes to support the system.
7. Using a standard CAT5/6 cable insert one end into the
Ethernet port on the back panel. Connect the other end of
the cable to your network access port.
You should be able to connect to the Torrent from a PC on the
network (Section 5.1.1) or set up a network printer
(Section 5.1.2).
5.1.1 Network PC Access
A successfully networked Torrent can be accessed by a PC that
meets the recommendations listed in Table 5-1.
To access the system, simply open an Internet Browser and
enter the IP address as “http://___.___.___.___”, where the
blanks are replaced by the selected address.
The browser window will load PeakTrak after you enter the
address.
Table 5-1 Personal Computer Recommendations a
Operating Systems: Microsoft Windows 2000, XP, Vista, or Windows 7
Hardware:
The computer hardware must meet the minimum
required specifications of the selected operating
system.
Network Protocol: TCP/IP
Network Connection: IEEE 802.3 (Ethernet)
Display:
800 x 600 pixels, 256 colors, minimum
Internet Browser:
Microsoft Internet Explorer 7.0 or later.
a. This table shows supported PC configurations. Other configurations or
AJAX-compatible browsers may be possible but are unsupported by Teledyne
Isco.
5.1.2 Network Printing
The Torrent can print to a network printer and supports both
JetDirect and line printer (LPR) queues.
Consult with your network administrator to determine the IP
address of selected printer. If the printer uses an LPR print
queue, you must also find out the queue name. If the printer
5-2