CombiFlash Torrent® User Manual - Isco

CombiFlash Torrent® User Manual
Follow the on-screen instructions for entering the address and
queue information. After successfully printing a test page, the
network printer will be available for printing using the
FILE>PRINT… [4.2.1.12] menu command and the
AUTOMATICALLY PRINT REPORT AT END OF RUN feature.
The Network printing controls may also be configured to print
to a local USB printer connected the system’s back panel USB
port. The printer must support postscript printing. To
configure the local printer, select Postscript for the Printer
Type. Then, type the following connection URL:
“usb:/dev/usb/lp0”.
Network File Save Configuration When configured, this feature
allows the module to access a network directory from which it
can save run files as PDF, text, or run monitor. To enable this
feature, select a file type to be saved and enter the remaining
settings necessary for network access. Your network
administrator will be able to provide the required settings.
NOTE: All server and domain names must be fully qualified.
That is, entries must include the full name (server
name.domain.domain…). Use forward slashes (/), not back
slashes, when entering the network share path.
4.3.10.3 User Preferences
Language Select the language for PeakTrak.
Automatically Print Report at End of Run If this option is
enabled, the module will print a completed run report using
the NETWORK PRINTING feature.
Beeper If enabled, the Torrent module will sound an alert
whenever user intervention is required during a run.
Default Run Units Run units are displayed along the X-axis of
the chromatogram. Select “Time, Minutes” or COLUMN
VOLUMES [ON-LINE] (CV) run units to be displayed on program
settings and chromatogram displays.
Enable Run Length Extension When enabled, this option
automatically extends the run if a peak is eluting at the end of
4-30