CombiFlash Torrent® User Manual - Isco

Section 4 User Help Reference
volume. During a run, other factors such as automatic tube
advances for detected peaks will affect collected volume.
See also: COLLECTION OPTIONS [ON-LINE].
Enable Automatic Column Purchase This feature requires a
current subscription in a Teledyne Isco Column Plan. Contact
your sales representative for more information on this feature.
The certificate issued with the column plan includes
instructions for activating this feature.
4.3.10.2 Network Configuration
Network configurations settings require assistance from your
network administrator. Contact your Information Technology
department before changing the settings.
Instrument IP Address Configuration Use these settings to
specify the instrument’s network address and its parameters:
• Network Type — Select the “Static IP” option.
This option will require an IP Address, Netmask, and
Gateway provided by your network administrator.
• IP Address — Enter the static IP Address for the
module.
Note: The module also provides limited support for
DCHP connections. If DHCP is desired, select DCHP
as the network type and follow the displayed
instructions to complete the connection.
• Netmask — Enter the Netmask for the module.
• Gateway — Enter the Gateway for the module.
Network Printing The module can print to a network printer
and supports JetDirect and line printer (LPR) queues.
Consult with your network administrator to determine the IP
address of selected printer. If the printer uses an LPR print
queue, you must also find out the queue name. If the printer
uses a JetDirect print queue, also ask for the port number.
When this information is known, you can proceed with
configuring module for network printing.
4-29