CombiFlash Torrent® User Manual - Isco
CombiFlash Torrent® User Manual - Isco
CombiFlash Torrent® User Manual - Isco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CombiFlash</strong> Torrent® <strong>User</strong> <strong>Manual</strong><br />
• Enable solvent B priming pump — The <strong>CombiFlash</strong><br />
Torrent module is equipped with a priming pump for the<br />
B solvent to ensure that the system forms repeatable<br />
gradients. This pump can be enabled or disabled.<br />
<strong>CombiFlash</strong> Torrent Name Enter a name for the module. This<br />
name will appear in the title bar of the Main window. The<br />
name will also appear in run summaries. Unique names are<br />
helpful when operating more than one <strong>CombiFlash</strong> Torrent<br />
module in your lab.<br />
Time Zone Select your local time zone.<br />
Set Date/Time Click this button to set the date and time. From<br />
the touch screen, this command opens a window that allows<br />
you to set the instrument date and time. If you select this<br />
command from a remotely connected computer, this menu<br />
command automatically sets the module time to match the<br />
computer’s.<br />
Note: The module will restart after you set the time.<br />
To prevent unauthorized time changes, this feature is<br />
password protected. See also: SET PASSWORD [4.3.11].<br />
Vapor Limit Type or select the vapor limit setting. The<br />
<strong>CombiFlash</strong> Torrent module’s internal vapor sensor detects<br />
vapors present in the module. When this value is exceeded,<br />
the module will shut down to avoid a hazardous condition. For<br />
more information, refer to SETTING THE VAPOR LIMIT [4.4.11].<br />
Set Default Tube Volume Click this button to open a window<br />
from which you can set the default volume of the collection<br />
tubes. You can increase or decrease these values to set the<br />
desired default volume collected in each container. Ensure<br />
that you do not enter a value that exceeds the container’s<br />
capacity. This will overfill the container.<br />
The Foxy fraction collector will automatically advance to the<br />
next tube when this default volume is met in each tube. Keep<br />
in mind that the PEAK COLLECTION [4.3.2.5] settings on the<br />
METHOD EDITOR [4.3.2] window may override this default<br />
4-28