CombiFlash Torrent® User Manual - Isco

CombiFlash Torrent® User Manual
4.3.6 Set Data Path
The FILE>SET DATA PATH… [4.2.1.4] menu command opens the
Set Data Path window. Use this window to select a default
folder for the current user. After selecting a folder, file
operations such as saving or opening files will use this selected
directory.
The Set Data Path primarily is used with the USER
MANAGEMENT [4.3.12] feature. User Management will
automatically create a folder for each user. When using the
module, set the data path to your folder or a subfolder within.
Each user has a different data path.
The window contains the following controls:
• Current Data Path — The top-left corner of the
window displays the path (current folder). As you browse
through the files, the path will update as you go.
• New — Click this button to add and name a subfolder
within the currently selected folder.
• Delete — Click this button to delete the selected folder.
• Folder selection box — This box lists the available
folders and selection buttons.
• OK — Click this button to save your selection as the
data path and close the window.
• Cancel — Click the Cancel button to close the window
without changing the data path.
4.3.7 Auto Prime/Valve Wash
The Auto Prime feature is a convenient way to prime the
pumps with solvent. This should be done whenever new
solvents are connected to the back panel ports. An Auto Prime
pumps 200 mL of the selected Solvent B, drawing it in through
the inlet port, through the pump and injection valve, and out
the waste port. The Auto Prime then does the same for Solvent
A. By priming Solvent A last, the module is ready for the
starting mobile phase of the next run.
The Auto Prime window is opened by selecting the
TOOLS>AUTO PRIME/VALVE WASH [4.2.3.1] menu command. The
window contains the following controls:
4-24