Glacier Transportable Sampler - Isco
Glacier Transportable Sampler - Isco
Glacier Transportable Sampler - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Glacier</strong> <strong>Transportable</strong> <strong>Sampler</strong><br />
Safety<br />
<strong>Glacier</strong> <strong>Transportable</strong> <strong>Sampler</strong><br />
<strong>Glacier</strong> Safety Information<br />
Electrical Requirements<br />
The <strong>Isco</strong> <strong>Glacier</strong> <strong>Transportable</strong> <strong>Sampler</strong> is a “definite purpose”<br />
device, intended for use only with compatible <strong>Isco</strong> equipment. Do<br />
not use this product with any other manufacturers’ equipment,<br />
or for any other purpose. Use for any purpose not described in<br />
this manual could cause personal injury or property damage.<br />
The <strong>Glacier</strong> requires 12 VDC at 6 amperes. The DC power input<br />
is through the two-pin connector on the side of the refrigerated<br />
compartment. The <strong>Isco</strong>-supplied DC connect cables provide<br />
over-current protection through the use of an in-line 8A, 32V<br />
fuse. The dual-power configuration of the <strong>Glacier</strong> may also be<br />
powered by an 87 to 264 VAC, 47 to 63 Hz, 2 ampere power<br />
source using the attached AC line cord. The AC-powered <strong>Glacier</strong><br />
is protected by an internal thermal cut-out. Additionally, the controller<br />
circuitry is protected by an internal 3.75 ampere PTC<br />
(Positive Temperature Coefficient) device.<br />
WARNING<br />
Electrocution hazard. Never manipulate electrical switches<br />
or power connections with wet hands or when your feet are<br />
in contact with water.<br />
WARNING<br />
Dual-power units only:<br />
AC electrical power must meet the applicable electrical<br />
code requirements for your installation and must be<br />
provided with an earth ground connection. If necessary,<br />
consult with a certified electrician to ensure that AC power<br />
is provided in accordance with the local electrical code.<br />
AC Powered <strong>Glacier</strong>s<br />
The AC power cord of this device is quipped with a three-prong<br />
grounding plug designed to mate with a grounded power outlet.<br />
Grounding minimizes the possibility of electrical shock.<br />
It is the user’s responsibility to ensure that the AC power source<br />
is properly grounded. If in doubt, have the outlet checked by a<br />
qualified electrician.<br />
If the available AC power outlet only accepts two prongs, or if it<br />
is determined that the outlet is improperly grounded, the outlet<br />
must be replaced by a qualified electrician before attempting to<br />
power this device.<br />
WARNING<br />
Never modify the AC power cord or use a three-prong to<br />
two-prong adapter.<br />
WARNING<br />
If this device’s power cord is frayed or otherwise damaged,<br />
discontinue its use immediately. The AC power cord is not<br />
user-serviceable and must be returned to the factory for<br />
repair or replacement.<br />
iii
Change language