Glacier Transportable Sampler - Isco
Glacier Transportable Sampler - Isco
Glacier Transportable Sampler - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Glacier</strong> <strong>Transportable</strong> <strong>Sampler</strong><br />
Section 2 Installation<br />
2.1 Installation Checklist 1. Place the <strong>Glacier</strong> <strong>Sampler</strong> in position (2.2)<br />
2. Inspect the pump tube (2.3)<br />
3. Install the bottle (2.4)<br />
4. Insert the temperature sensor into the bottle (2.5)<br />
5. Check the discharge tube (2.6)<br />
6. Connect a power source (2.7)<br />
7. Connect a suction line and strainer (2.8)<br />
8. External connections (essential for flow-paced sampling or<br />
sampler inhibiting, section 2.9)<br />
9. Calibrate sample volumes (optional, section 2.10)<br />
10. Start the Program (2.11)<br />
11. Secure the <strong>Glacier</strong> (2.12)<br />
2.2 Positioning the<br />
<strong>Sampler</strong><br />
There are a few considerations when selecting a site for the<br />
<strong>Glacier</strong> sampler. The foremost concern should be personal safety.<br />
WARNING<br />
The installation and use of this product may subject you to<br />
hazardous working conditions that can cause you serious<br />
or fatal injuries. Take any necessary precautions before<br />
entering the worksite. Install and operate this product in<br />
accordance with all applicable safety and health<br />
regulations, and local ordinances.<br />
WARNING<br />
If this product is used in a manner not specified in this<br />
manual, the protection provided by the equipment may be<br />
impaired.<br />
WARNING<br />
AC Powered <strong>Glacier</strong>s – Never defeat or modify the mains<br />
plug earth ground connection.<br />
2-1