6100CR Refrigerated Sampler - Isco

6100CR Refrigerated Sampler
Section 2 Programming
Or:
UNIT OFF AT
HH:MM DDMMMYY
4. When you activate a sampling program by pressing the
Run key, the following display will appear on the log:
PROGRAM ACTIVATED
HH:MM DDMMMYY
When the sampling sequence actually begins, the following
display will appear on the log:
PROGRAM STARTED AT
HH:MM DDMMMYY
The following log entry will display for a sampling event:
SAMPLE: 1 HH:MM
BOTTLE: 1 DD MMM
5. If you press the Right Arrow key again, the following log
entry will appear:
SOURCE: FLOW
The possible Sources are: TIME, FLOW, START, MULTI-
PLE, and MANUAL.
If there was a problem and the unit was unable to take a
sample at that time, this message would appear instead:
SOURCE: FLOW
ERROR: RACK JAM (example)
The possible errors are: RACK JAM, TOWER JAM, RACK
FULL, UNIT OFF, VALVE JAM, DISABLED, and POWER
FAIL.
When the sampling sequence ends, the log will display:
PROGRAM FINISHED AT
HH:MM DDMMMYY
When the sampling program has finished (or was stopped)
and the 6100CR has returned to the standby state, the log
2-18