6100CR Refrigerated Sampler - Isco

More documents

Recommendations

Info

6100CR Refrigerated Sampler Section 2 Programming 2.8 Error Messages The possible ERROR types are: • RACK JAM • TOWER JAM • RACK FULL • VALVE JAM • POWER FAILURE If the RACK JAM message appears, try to clear the problem by pressing the Rack Reset key. If TOWER JAM appears, call Teledyne Isco Customer Service. RACK FULL means the sampler has filled all 24 bottles, and you will need to replace the bottle rack with a new one. VALVE JAM indicates the sampler was unable to open the valve on the sample bottle. Check the bottle in question and make changes as necessary. POWER FAILURE means that the power was disconnected during the sampling routine. If there is some problem and the unit is unable to take a sample two times in a row because of the same error, an ERROR message will appear on the display: *SAMPLING ERROR* (error type) 2.9 The Display Status Key and the History Log 1. When you press the Display Status key, the sampler will show you a log of events it has recorded in memory. The first display will ask you to choose from the following: DISPLAY STARTING AT BEGINNING LAST SAMP 2. If you select LAST SAMP, the display will only show you the record for the last program the 6100CR has run. 3. If you choose BEGINNING, the log will go as far back as the internal memory allows. It will either go to the first entry made or to the oldest entry in memory. (When memory allocated to the log is full, the log will begin overwriting the oldest entries with new ones.) If you choose BEGIN- NING and the entries are too long or not what you want, you can leave the log by pressing the Clear/Exit key. Note In general, LAST SAMP is the better choice for viewing the log. Do not select BEGINNING unless you need to look over the entire log. There may be a large number of entries. If the sampler has been running for some time, the log can have as many as 1,000 entries, going back several months. Trying to make sense of all this when you can only see two lines at a time could be difficult. You can use the Clear/Exit key to leave the log at any point. 2-16
6100CR Refrigerated Sampler Section 2 Programming You can move backward and forward through the log with the arrow keys. The Left Arrow key moves backward and the Right Arrow key moves forward. If you press the Left Arrow key to go backward and the display is in a sequence that has two different messages to display, the display will still advance to the second message before reversing and moving through previous displays. 2.10 Quick View of Sampling Sequences Only 2.11 The Display Status Screens If you are viewing the log and want to move to the next sampling sequence, press the Right Arrow key and then press Enter. The display will advance to the next sampling sequence. Continue pressing Enter to move the log forward through each successive sampling sequence. If you want to revert to the previous sampling sequence, press the Left Arrow key and then press Enter. The display will return to the first screen of the previous sampling sequence. Using this method, you can quickly move through the log, stopping only at the beginning of each sampling sequence. The log displays times in military format. One to eleven p.m. will appear as 13:00 to 23:00. Dates appear as day, month, and year. “Day” will be one or two digits. “Month” will appear as a three-letter abbreviation, as “JAN” for January. “Year” will be two digits as “03.” At the start of the log: START OF HISTORY LOG HH:MM DDMMMYY 1. When you apply power to the unit, the following display will appear on the log: POWER RESTORE AT HH:MM DDMMMYY 2. If you remove power from the unit, the following display will appear on the log: POWER FAIL AT HH:MM DDMMMYY 3. When you use the On/Off key, the following will appear: UNIT ON AT HH:MM:SS DDMMMYY 2-17
Page 1: 6100CR Refrigerated Sampler Install
Page 5 and 6: 6100CR Refrigerated Sampler Site Re
Page 7 and 8: 6100CR Refrigerated Sampler Table o
Page 9 and 10: 6100CR Refrigerated Sampler Table o
Page 11 and 12: 6100CR Refrigerated Sampler Section
Page 39: 6100CR Refrigerated Sampler Section
Page 71 and 72: 6100CR Refrigerated Sampler Appendi
Page 73 and 74: 6100CR Refrigerated Sampler Replace
Page 75 and 76: 6100CR Refrigerated Sampler Replace
Page 87: Compliance Statements Teledyne Isco

6100CR Refrigerated Sampler - Isco

Create successful ePaper yourself

Delete template?

Save as template?