6100CR Refrigerated Sampler - Isco

6100CR Refrigerated Sampler
Section 1 Introduction
Note
Never install the Refrigerated 6100CR Sampler where there is
any possibility of submersion. The electronic components are
environmentally sealed, but the mechanical components cannot
be. The linkages and moving parts inside the controller can
be damaged by submersion. Parts of the refrigeration mechanism
can also be damaged by submersion, particularly the
condenser fan. Exposure of the mechanical parts to water will
void the warranty.
1.1 How the 6100CR
Works
The 6100CR Refrigerated Volatile Organic Sampler consists of a
6100VOC Sampler mechanism installed inside a refrigerator.
The primary purpose of this sampler is to monitor VOC concentrations
in waste discharge effluent from bleaching operations at
paper pulp mills. Continuous sample fed from a pressurized
effluent line is periodically injected by needle into sample bottles
that are sealed before and after the sample is taken to prevent
contamination. Location of the sample bottle rack inside the
refrigerator ensures rapid cooling of the sample, which also
retards its decomposition.
Figure 1-1 6100CR Refrigerated Sampler
1-1