D-Series Syringe Pumps - Isco
D-Series Syringe Pumps - Isco
D-Series Syringe Pumps - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
D <strong>Series</strong> <strong>Syringe</strong> <strong>Pumps</strong><br />
Section 3 Single & Multiple Independent Pump Operation<br />
3.3.2 Refill The refill option allows you to set the refill rate or have the pump<br />
automatically refill when a certain volume is reached.<br />
To set auto refill volume<br />
1. Press the orange MENU key.<br />
2. Press number 3, REFILL. The auto refill menu, Figure 3-3<br />
will be displayed.<br />
1. REFILL MARK<br />
2. AUTO REFILL<br />
3. REFILL RATE<br />
PUMP A<br />
VOLUME A:<br />
PUMP A:<br />
PUMP A:<br />
000.00mL<br />
OFF<br />
000.00mL/MIN<br />
PREVIOUS<br />
A B C D<br />
Figure 3-3 Refill menu<br />
Note<br />
If more than one pump is connected to the controller, pump B<br />
and pump C will be displayed on the fourth line. To select a<br />
pump, press the softkey under the pump designation.<br />
3. Press the number 1 key to set the volume for pump A.<br />
4. The units to the right of the symbol will blink, indicating<br />
that you should enter a volume. Use the number keys to<br />
enter an appropriate value and then press the ENTER key.<br />
Disable/Enable Auto Refill<br />
To set refill rate<br />
To exit<br />
The second line will display “OFF” or “ON”, indicating whether<br />
or not this feature is enabled for pump A (or the currently<br />
selected pump). Press the number 2 key to toggle this feature off<br />
and on for each pump, as desired.<br />
If auto refill is ON, then the pump will automatically switch to<br />
refill mode when the volume reaches the auto refill mark. After<br />
refilling, pumping will resume in the programmed mode. The<br />
ACCESSORY outputs, which drive powered valves, will switch in<br />
sequence.<br />
1. Press the number 3 key to set the refill rate for the designated<br />
pump. The refill rate can also be changed from the<br />
main screen while the pump is refilling.<br />
2. A message will blink on the screen prompting you to enter<br />
the selected refill rate.<br />
3. Enter the desired rate using the number keys.<br />
4. Press the ENTER key to save the value.<br />
1. To exit the refill menu, press softkey D, PREVIOUS. You<br />
will be returned to the main menu; and your selections will<br />
be saved.<br />
3.3.3 Power Failure [STOP] This feature allows you to dictate the activity of the pump in the<br />
event of a power failure. Use the number 4 key to toggle this<br />
feature to [STOP] or [CONT] to automatically resume pumping<br />
after power is restored.<br />
3-5