D-Series Syringe Pumps - Isco

D Series Syringe Pumps
Section 3 Single & Multiple Independent Pump Operation
Note
Mistakes – If you make an incorrect entry, press the CLEAR
ENTRY key to delete your last keystroke. If you have entered a
programming mode but do not wish to make any changes,
press the ENTER key to retain the current setting. If you find
yourself locked in a menu, press softkey D under RETURN or
EXIT to return to the previous screen.
3.2.1 Display There are two types of screen displayed: programming screens
and run screens.
Programming screens
Run screens
The programming screens are divided into separate menus.
These menus are accessed when different features are being programmed.
The run screen appears once a program has been loaded and the
pump is running.
The run screen, which varies depending on the mode you have
set, displays current information about your pumping operation.
There is a great deal of information displayed in a small amount
of space. The following paragraphs describe the display line by
line.
Line One – No matter what mode you are in, the first line of the
run screen is always the same.
Active
Pump
Actual Pressure
Volume Remaining
PGa
.000 mL/MIN
PSI
XXX.XX ml
Current Mode
Actual Flow Rate
Line Two – The second line varies slightly depending on the
operating mode. A file or step will only be displayed when operating
in the gradient mode.
Elapsed Time
STOPPED
FILE/STEP
000:00:00
Status
Step of program running or
loaded file number
3-2