D-Series Syringe Pumps - Isco

D Series Syringe Pumps: Model 1000D
Section 2C 1000D Liquid System Connection & Accessories
2. Secure the tubing with pliers on each side of the score line,
leaving approximately 1 16" between each set of pliers and
the score line. Care must be taken not to squeeze the tubing
too tightly, as that will flatten or deform the exterior of
the tubing.
3. With the pliers, bend the tubing back and forth to cause
cracking at the score line. The bending should be done in
two places to reduce the chance of squashing the tubing.
4. It may be necessary to deburr the outside of the tubing
ends with the file. Make sure the tubing ends are clean and
the inner bore is clear before installing the cut tube.
Note
It is often impossible to remove a burr that blocks the inner
bore.
2C-3