D-Series Syringe Pumps - Isco

D Series Syringe Pumps: Models 65DM, 100DM, 100DX, 260D
Section 2A 65DM, 100DM, 100DX, and 260D Liquid System Connections & Accessories
2A.8 Optional Accessories Table 2A-7 presents the optional accessories available for use
with the 100DX/DM and 260D pumps.
Table 2A-7 Optional Accessories
Software
Part Number Description
Call Teledyne Isco LabView Virtual Instrument Drivers – interfaces D Series Pumps with LabView Software
Tubing
004-7300-21 Stainless steel 304 tubing, 1 16" OD 0.020" ID
004-7302-22 Stainless steel 304 tubing, 1 8" OD 0.069" ID
004-7300-23 Stainless steel 304 tubing, 1 16" OD 0.007" ID
004-7601-00 Stainless steel 316 tubing, 1 16" OD 0.031" ID
004-7462-51 Stainless steel 316 tubing, 1 16" OD 0.009" ID
Extension Cables
68-1020-210 Pump/Controller extension cable, 3 m.
68-1020-214 Pump/Controller extension cable, 15 m.
Inlet/Outlet Fittings
209-0166-80
1 8" SST plug
209-0162-00
1 8" - 1 16" tubing reducing union
In-Line Filter Package (P/N 68-1247-011)
Qty. Part Number Description
1 60-1243-231 1.5 m - Stainless steel tubing, 1 16" OD 0.020" ID
1 60-1243-232 0.3 m- Stainless steel tubing, 1 16" OD 0.020" ID
1 209-9012-17 In-line solvent filter with replacement frit, 0.5 micron filter
5 209-0094-07 Zero volume, 1 16" nut
5 209-0094-08 Zero volume, 1 16" ferrule
Other Accessories
209-9012-21 5 bar back pressure regulator
209-9012-22 7 bar back pressure regulator
68-1247-093 260D High accuracy transducer. Contact factory for specifications.
2A-17