D-Series Syringe Pumps - Isco
D-Series Syringe Pumps - Isco
D-Series Syringe Pumps - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
D <strong>Series</strong> <strong>Syringe</strong> <strong>Pumps</strong>: Models 65DM, 100DM, 100DX, 260D<br />
Section 2A 65DM, 100DM, 100DX, and 260D Liquid System Connections & Accessories<br />
2A.7 Optional Seals Typically, the general seal provided with your pump will satisfy<br />
your application’s requirements, including SFE or other applications<br />
which use carbon dioxide. However, certain solvents and/or<br />
conditions require the cylinder seal be changed to facilitate the<br />
application. Table 2A-6 is provided to help you select the correct<br />
seal for your pump and application requirements.<br />
Seal Type<br />
GENERAL/SFE<br />
CARBON<br />
DIOXIDE<br />
HIGH<br />
TEMPERATURE<br />
Maximum<br />
Pressure Rating<br />
for Seal (bar)<br />
Table 2A-6 Seal Selection Chart<br />
0-689.5 bar Black, PTFE<br />
graphite filled<br />
Seal Description 100DX/DM 260D 500D 1000D<br />
202-9090-75 202-9091-06 202-9091-56 upper seal<br />
202-9990-25<br />
lower seal<br />
202-9990-23<br />
This is our standard seal. It is good for most applications, particularly those using organic solvents,<br />
such as: LC, SFC, and SFE.<br />
0-689.5 bar Black, PTFE<br />
graphite fiber<br />
reinforced high<br />
temperature<br />
compound<br />
202-9090-76 202-9091-09 202-9093-56 upper seal<br />
202-9990-28<br />
lower seal<br />
202-9990-27<br />
This seal is best suited for applications which require temperatures between 50°C and 100°C. Its<br />
chemical compatibility is similar to that of the general seal.<br />
LOW PRESSURE 0-137.9 bar Black, PTFE<br />
graphite filled<br />
single point<br />
contact<br />
202-9092-75 202-9092-06 202-9092-56 N/A<br />
This seal may provide better sealing at lower pressure. Its chemical compatibility is similar to that<br />
of the general seal.<br />
AQUEOUS 0-689.5 bar White-translucent,<br />
ultra-high<br />
molecular weight<br />
polyethylene<br />
AMMONIA (NH3)<br />
NITRIC ACID<br />
202-9090-77 202-9094-06 202-9094-56 N/A<br />
This seal has better wetting properties, which makes it a good choice for aqueous solutions. It is<br />
also the best choice for electrochemical detection.<br />
Note: This seal requires a special break-in procedure before installation. See Section 5.3.2.<br />
0-275.8 bar White, virgin<br />
PTFE<br />
This is the only seal which is recommended for ammonia.<br />
Note: Call the factory for seal availability for the 65D pump.<br />
202-9090-78 202-9091-07 202-9091-57 upper seal<br />
202-9990-26<br />
lower seal<br />
202-9990-24<br />
2A-16