D-Series Syringe Pumps - Isco

More documents

Recommendations

Info

D Series Syringe Pumps: Models 65DM, 100DM, 100DX, 260D Section 2A 65DM, 100DM, 100DX, and 260D Liquid System Connections & Accessories Figure 2A-9 Cooling/Heating jacket installed Table 2A-5 Packages and Parts Item Description Temperature control jacket packages for: 65D, 65DM,100DM, 100DX, 260D 500D 500SP 1000D Temperature control jacket assembly: 65DM, 100DM, 100DX, 260D 500D 1000D Part Number 68-1247-047 68-1247-057 68-1247-115 60-5364-199 60-1248-053 60-1248-099 60-1248-183 Key 3 32" socket 490-0031-54 Inlet/outlet connector (2) 209-0161-00 Installation procedure 60-1242-183 O-ring (2): 100DM, 100DX, 260D 202-2062-23 500D 202-2062-11 1000D 202-2062-35 2A-12
D Series Syringe Pumps: Models 65DM, 100DM, 100DX, 260D Section 2A 65DM, 100DM, 100DX, and 260D Liquid System Connections & Accessories To install the cooling jacket 1. Install the O-rings in the grooves of the cooling jacket. 2. Lubricate the O-rings with soapy water or a light oil to ease assembly of the cooling jacket onto the cylinder. 3. Slide the cooling jacket onto the cylinder using a twisting motion. Note It is important that the cooling jacket be installed with the locking set screw away from the cylinder cap. CAUTION Be careful not to damage the O-rings when pushing them over the threads of the cylinder. Reassembling the pump 1. Place the cylinder/cooling jacket assembly over the piston and push rod assembly. 2. Screw the assembly into the cylinder housing until the cylinder no longer turns. This indicates that it is snug against the piston. 3. Unscrew the cylinder a minimum of 1 2 turn. 4. Line the inlet and outlet cylinder cap ports up as you had them before. Turn the cooling jacket ports to the desired location and lock the cooling jacket to the cylinder by tightening the cooling jacket lock set screw. 5. Lock the cylinder by tightening the cylinder locking screw. 6. Replace the front cover and adjust both covers so they are flush with the cylinder housing. 7. Reinstall tubing. 8. Reconnect the pump pressure transducer cable. Note Anytime you adjust fittings on the cylinder cap you should re-zero your pump’s pressure transducer. See section 3.5.8. The pump’s pressure transducer is a very sensitive strain gage which can be offset as much as 17.2 bar by tightening fittings. 2A.4.3 Back Pressure Regulation DANGER RISK OF INJURY. THE PRESSURE PRODUCED COULD BE 700 BAR. PLEASE UTILIZE THE APPROPRIATE TUBING AND CONNECTIONS NOTED IN THE MANUAL. 2A-13
Page 1: D-Series Pumps Installation and Ope
Page 5 and 6: D Series Syringe Pumps Warnings, Ca
Page 15 and 16: D Series Syringe Pumps Table of Con
Page 23 and 24: D Series Syringe Pumps Section 1 In
Page 41 and 42: D Series Syringe Pumps: Models 65DM
Page 51: D Series Syringe Pumps: Models 65DM
Page 61 and 62: D Series Syringe Pumps: Model 500D
Page 77 and 78: D Series Syringe Pumps: Model 65D S
Page 85 and 86: D Series Syringe Pumps Section 3 Si
Page 103 and 104:
D Series Syringe Pumps Section 3 Si
Page 105 and 106:
D Series Syringe Pumps Section 3 Si
Page 107 and 108:
D Series Syringe Pumps Section 4 Th
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
D Series Syringe Pumps Section 5 Pu
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
D Series Syringe Pumps Section 6 Se
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
D Series Syringe Pumps Section 7 Gr
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
D Series Syringe Pumps Section 8 Co
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
D Series Syringe Pumps Section 9 Mo
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
D Series Syringe Pumps Appendix A R
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
D Series Syringe Pumps Index A Acc
Page 279 and 280:
D Series Syringe Pumps Index comman
Page 281:
Compliance Statements NOTICE Disreg
Page 285:
DECLARATION OF CONFORMITY Applicati
Page 288 and 289:
Warranty
show all

D-Series Syringe Pumps - Isco

Create successful ePaper yourself

Delete template?

Save as template?