D-Series Syringe Pumps - Isco

D Series Syringe Pumps: Models 65DM, 100DM, 100DX, 260D
Section 2A 65DM, 100DM, 100DX, and 260D Liquid System Connections & Accessories
Table 2A-4 Optional in-line Filter Package
Qty. Part Number Description
(P/N 68-1247-011)
1 60-1243-231 1.5 m stainless steel tubing, 1 16" OD 0.020" ID
1 60-1243-232 0.3 m stainless steel tubing, 1 16" OD 0.020" ID
1 209-9012-17 In-line solvent filter with replacement frit, 0.5
micron filter
5 209-0094-07 Zero volume, 1 16" valve nut
5 209-0094-08 Zero volume, 1 16" valve ferrule
To install the in-line
filter package
(Figure 2A-7)
1. Attach the reducing adapter, included with your pump
accessory package to the pump outlet using the nut and
ferrule provided. Or, connect to the reducing union of the
outlet valve package.
2. Attach the 1 16" - 1.5 m length of tubing to the reducing
adapter. Cut to the desired length.
3. Then attach the in-line filter to the end of the tubing. The
flow direction is indicated on the filter body.
4. Connect the remaining 0.3 m length of tubing between the
in-line filter and the receiving device. Cut to the desired
length.
1.5 m Tubing Length In-line Filter 0.3 m Tubing Length
Figure 2A-7 In-line filter package
2A-9