D-Series Syringe Pumps - Isco

D Series Syringe Pumps: Models 65DM, 100DM, 100DX, 260D
Section 2A 65DM, 100DM, 100DX, and 260D Liquid System Connections & Accessories
2A.3.2
CO 2 Cylinder
Connection Package
The optional CO 2 connection package is part number
68-1247-043, Table 2A-2.
Table 2A-2 CO 2 Cylinder Connection Package
Qty. Part Number Description
1 209-0161-63 Reducing connector 1 8" to 1 4"
1 209-0161-16
1 4" 2 1 2" nipple
1 209-0161-15 0.830-14 nut
1 209-0161-17 PTFE washer
1 209-0161-64 In-line filter assembly
(P/N 68-1247-043)
Figure 2A-5 CO 2 package installation
2A.3.3
Manual Outlet Valve
Package
The optional manual outlet valve package is part number
68-1247-078, Table 2A-3.
Table 2A-3 Manual Outlet Valve Package
(P/N 68-1247-078)
Qty. Part Number Description
1 60-1243-659 Valve spacer
1 60-1243-322 5.1 cm - 0.069 ID stainless steel tubing
1 209-0169-27
1 8" nut, zero volume
1 209-0169-41 Ferrule, 1 8" zero volume
1 209-0162-00
1 8" - 1 16" union
1 209-0098-05 2-way straight valve
1 60-1243-658
1 8" OD - 0.069 ID stainless steel tubing
1 60-1243-320
1 16" OD - 0.02 ID 0.9 m stainless steel tubing
Appropriate screws and washers also included.
To install the outlet
valve package
(Figure 2A-6)
1. Attach the 2-way valve using the spacer block and panhead
screws provided in the refill kit.
2. Connect the pre-bent 1 8" OD length of stainless steel tubing
to the outlet port on the pump using the 1 8" nut and 1 8"
2A-7